Lumber

Question: 

Some questions have been raised regarding the levels of mold in the lumber used in one of our truss projects. The issue of indoor air quality is up and coming. Do you have any information regarding standard allowable values? And how can we test for these contaminants?

Question: 

I have been told that the high temperatures and low humidity present in attics can cause deterioration of wood, leading to truss failure. Is this true? If so, what length of time are we looking at and can we see the deterioration in the wood by visual inspection?

Question: 

We recently received bids on a school project, which referenced UL P523. This assembly used light-gauge steel trusses. We noted on the drawing that we could accept an alternate design using wood trusses in lieu of light-gauge steel framing, if the alternate design could meet the fire ratings.

Question: 

I have been hired by an insurance company to determine the extent of damage to roof trusses exposed to fire. How much fire damage compromises the structural integrity of the truss?

Question: 

The Gypsum Association “Fire Resistance Design Manual” (GA-600-12) lists file RC2601 with two layers of 5/8 in. gypsum wallboard (GWB) on wood joists.

Question: 

I am developing a sustainable community in southeast Iowa. We have an abundance of cottonwoods nearby. I plan to have them sawn into dimensional lumber on the site and dry it there as well. I would like to use this material for trusses. A truss plate manufacturer informed me that because he had no data for cottonwood, he was unable to design trusses using it. Can you offer any advice?

Question: 

Is a Class A fire rating (provided by our liquid spray-on fire retardant) acceptable in certain situations?

Question: 

Can one use pressure-treated lumber in metal plate connected truss construction? If so, are special plates or coatings required?

Question: 

I would like to know if there is an age restriction on wood trusses. How long after production are they safe to use? The trusses in question are at least three to four months old. Are they still safe to use? They have not been covered the entire time and are showing signs of age.

Question: 

Is finger-jointed material allowed in the manufacturing of trusses?