DOC Outlines Steel Tariff Product Exclusion Process
Originally published by: U.S. Dept of Commerce (DOC) — March 18, 2018
The following article was produced and published by the source linked to above, who is solely responsible for its content. SBC Magazine is publishing this story to raise awareness of information publicly available online and does not verify the accuracy of the author’s claims. As a consequence, SBC cannot vouch for the validity of any facts, claims or opinions made in the article.
Editor’s Note: We stated in our last article on the Section 232 steel tariffs it was unclear how the Administration was going to handle individual product exemptions. Yesterday, the U.S. Department of Commerce (DOC) revealed it would begin accepting applications for exclusion consideration. We presume that our industry’s buyers of steel will petition for an exclusion on the steel they import to use for metal connector plates, equipment, etc. Below are details from the DOC. We look forward to publishing the petitions steel buyers in our industry submit to the DOC through this process.
Today, the U.S. Department of Commerce announced its procedures for excluding products from the recently announced tariffs on steel and aluminum product imports. As directed by President Trump, the Department will publish the procedures in the Federal Register and will start accepting exclusion requests from U.S. industry on Monday, March 19, 2018, at 8:45 AM
Click HERE to see the Federal Register notice.
“These procedures will allow the Administration to further hone these tariffs to insure they protect our national security while also minimizing undue impact on downstream American industries,” said Secretary Ross. “Starting tomorrow, domestic industry will be able to apply for exclusions through a fair and transparent process run through Commerce’s Bureau of Industry and Security.”
Secretary Ross, in consultation with other Administration officials, will evaluate exclusion requests, taking into account national security considerations. In that evaluation, the Secretary will consider whether a product is produced in the United States of a satisfactory quality or in a sufficient and reasonably available amount. A single response to each exclusion request will be posted on regulations.gov.
Only individuals or organizations using steel or aluminum articles identified in Presidential Proclamations 9704 and 9705 and engaged in business activities in the United States may submit exclusion requests. Exclusion requests will be posted for a 30-day comment period on regulations.gov.
Separate exclusion requests must be submitted for each unique steel or aluminum product import. For an exclusion request to be considered, the requester must provide a full factual description of the specific product, its properties, and its quantity.
Any individual or organization in the United States may file objections to steel or aluminum exclusion requests, but the Commerce Department will only consider information directly related to the submitted exclusion request that is the subject of the objection. Organizations submitting an objection filing on an exclusion request should provide specific information on the product that their company can provide that is comparable to the steel or aluminum product that is the subject of the exclusion request.
Organizations filing an objection should also provide factual information on the production capabilities at steel or aluminum manufacturing facilities that they operate in the United States; the availability and delivery time of the products that they manufacture relative to the specific steel or aluminum product that is subject to an exclusion request; and discussion on the suitability of its product for the application or applications identified by the exclusion requestor.
Both the exclusion requests and objection filings will be available for public viewing on regulations.gov. Processing of exclusion requests normally will not exceed 90 days, including adjudication of objections submitted on exclusion requests.
The forms for submitting steel and aluminum exclusion requests, and objections to specific exclusion requests, will be available on regulations.govon March 19, 2018, at 8:45 AM. The steel docket number is BIS-2018-0006 and the aluminum docket number is BIS-2018-0002.
Copies of the forms and additional information on the exclusion process will be available at https://www.bis.doc.gov/index.php/232-steel and https://www.bis.doc.gov/index.php/232-aluminum on March 19, 2018, at 8:45 AM.
On March 8, 2018, President Trump exercised his authority under Section 232 of the Trade Expansion Act of 1962 to impose a 25 percent tariff on steel imports and a 10 percent tariff on aluminum imports, with exemptions for Canada and Mexico, in order to protect our national security. The President’s Section 232 decisions are the result of investigations led by the Commerce Department, after review and comment by other relevant Federal agencies. Customs and Border Protection will begin collecting the tariffs on March 23, 2018.
In his proclamation establishing the tariffs under Section 232, the President authorized the Secretary of Commerce, in consultation with other appropriate federal agency heads, to provide relief from the additional duties for any steel or aluminum articles determined "not to be produced in the United States in a sufficient and reasonably available amount or of a satisfactory quality and is also authorized to provide such relief based upon specific national security considerations. Such relief shall be provided for any article only after a request for exclusion is made by a directly affected party located in the United States.”