DuPont Provides Safety Tips for Construction Workers

Originally published by: DuPontJune 14, 2017

The following article was produced and published by the source linked to above, who is solely responsible for its content. SBC Magazine is publishing this story to raise awareness of information publicly available online and does not verify the accuracy of the author’s claims. As a consequence, SBC cannot vouch for the validity of any facts, claims or opinions made in the article.

America’s 6.5 million construction workers are the unsung heroes of the industry when it comes to facing safety risks on the job. Almost a third of them routinely work hundreds of feet above the ground, balanced on scaffolding as they wield the heavy tools required to erect a building. In commercial construction sites, falls are a serious risk. However, a residential rooftop can be just as dangerous.

Injuries resulting from falls, slipping or tripping are among the top five construction-site hazards identified by leading insurance companies.1 The other two filling out the top five are over-exertion and being struck by falling objects, but the list doesn’t end there. A trench with an improper slope can collapse. A crane or its payload can strike a worker. In addition to these “caught in” and “struck by” hazards, there can be serious chemical or electrical dangers present on a site.

“Be careful out there!” is clearly the most suitable motto for these workers. But making a rugged workplace safer is a complex, multi-faceted challenge that goes far beyond slogans. Safety involves education, government regulation and enforcement, and the creation of a “culture of safety.” Beyond these three components, the manufacturers of construction tools and materials can play an important role in helping make construction sites safer.

The ABCs of Safety

The first step towards construction site safety is education. From the safety perspective, there are right ways and wrong ways to erect scaffolding, reinforce trenches, install roofing and even hammer nails — and the right ways aren’t always self-evident. Workers must be trained so they know what is safe and what is not.

In many cases, this training occurs in technical schools or apprenticeship programs. Sometimes, however, on-the-job training is required to make workers aware of specific dangers associated with new tools or building materials, such as paints and solvents, which may pose explosion hazards or require protective equipment. In these cases, manufacturers can play a key educational role.

From Theory to Practice

In the real world of tight deadlines and constant pressure on contractors to get the most value out of every labor hour, putting safety principles into practice on the job is no small challenge. So keeping workers safe is a top priority for government agencies such as The Occupational Health and Safety Administration (OSHA), which mandates thousands of construction site safety practices.2 Indeed, OSHA inspectors are a regular presence at major construction sites.

A second force aligned with safety is often referred to as a “culture of safety,” aptly defined as what people do when no one else is looking. Some companies reward safety by making it part of the performance appraisal process.

Building Safety into the Job

Another component of safety on construction sites is making the products themselves safer. Manufacturers have a unique opportunity to build safer products — ones that help to mitigate the inherent risks of working in the construction industry.

DuPont™ Tyvek® Protec™ roofing underlayment products are one such example. This innovative product line offers numerous advantages. It lays flat and is wrinkle-free, making it easier to install, with an important safety bonus: its unique embossed pattern allows for better traction and grip while walking on roofs. With the use of proper safety equipment, this industry-leading walkability reduces the likelihood of falls, helping to decrease risks for roofers.

Tyvek® received global recognition at the International Builders Show as a finalist in the innovation-of-the-year category.3Since its launch, it has been featured and recognized in Roofing Contractor Magazine, Editor’s Choice Products that can have an impact, Green Builder Media — Top 50 Products, and Roofing Magazine, just to name a few.

Safety First

DuPont™ Tyvek® Protec™ roofing underlayments are a huge improvement from tar paper, also referred to as roofing felt, which is heavy and tears easily, creating safety hazards for roofing installers. Products like DuPont™ Tyvek® Protec™ reduce these risks.

Through innovative product design applied to Tyvek® Protec™, risk has been reduced without increasing costs or jeopardizing product acceptance in the marketplace. All that’s necessary is to make “Safety First” a motto for the design department as well as the workplace.


Check out this extra section in each digital issue of SBC Magazine for additional news, perspective, and advertiser content. Learn more and access 2016-2017 archives here.