Video Highlights Unique Truss Design
Originally published by: YouTube — December 29, 2011
The following article was produced and published by the source linked to above, who is solely responsible for its content. SBC Magazine is publishing this story to raise awareness of information publicly available online and does not verify the accuracy of the author’s claims. As a consequence, SBC cannot vouch for the validity of any facts, claims or opinions made in the article.
Here is a video on a unique truss layout:
Transcript from video:
Hi, I'm Tim Carter and I'm at a new construction site in New Hampshire. It's a frosty morning. But I have an opportunity show you a very unique truss design. Look at this.
Here's a nice new truss that's actually for the garage of this home. Most trusses you see the rafter come down and meet the bottom chord, but look at this funny design. Here's the bottom chord but it takes a turn and runs down to the wall. You might ask why this design?
Looking across the bottom of the trusses, the garage door opening is on the other end. You can see a narrow rectangle formed by a piece of 2x4 above the garage door. Here in the Northeast, it is very common to have transom windows. This is a very neat architectural feature. These windows allow a lot of light to enter into the garage. Because they went with extra tall doors and there is a transom above it, you have to be able raise the bottom of the trusses up. This will allow the transom windows to be below the ceiling.
If you can dream it with the truss or its shape, normally the truss fabricator can create.